Smart Controller V13.2
HOME AUTOMATION SMART CONTROLLER
This unit can be set as UDP Remote controller or as WEB Server Remote controller . Easy to setup using a small menu and a LCD display . When set as UDP , the user need to instal on his device ( phone , tablet , i-pad ) an application to communicate with the controller which need to be connected to the router thru a cat5 or cat6 cable . With this configuration the controller can be accessed only from local network . When set as WEB Server , the user need to create a ''forward port'' rule in the settings of the router , and the controller can be accessed from all over the planet .
When set as UDP , a command is executed in less then one second and as a WEB Server the time is between 3 and 5 seconds on a local network and can reach longer times when accessed from another network or different country .
Power supply : 12Vdc / 1A
Output : 7 Free volt outputs ( relay )
-OUT1 independent
-OUT2 independent
-OUT3 independent
-OUT4 together with OUT6
-OUT5 together with OUT7
All network parameters are editable : IP , PORT , Gateway Address , Subnet Mask , MAC Address
Network settings are the same for UDP and WEB .
Default settings :
IP : 192.168.0.100
PORT : 9000
Gateway Address : 192.168.0.1
Subnet Mask : 255.255.255.0
MAC Address : 0.0.0
The outputs names on the WEB Server are all editable and can be 9 characters long .
The UDP controller has a unique ID which is use on all commands, and the commands are :
output 1 on : A5f4out01on
output 1 off : A5f4out01of
output 2 on : A5f4out02on
output 2 off : A5f4out02of
output 3 on : A5f4out03on
output 3 off : A5f4out03of
output 4 on : A5f4out04on
output 4 off : A5f4out04of
output 5 on : A5f4out05on
output 5 off : A5f4out05of
all outputs on : A5f4out99on
all outputs off : A5f4out99of
Where A5f4 is the controller ID .
This unit can be set as UDP Remote controller or as WEB Server Remote controller . Easy to setup using a small menu and a LCD display . When set as UDP , the user need to instal on his device ( phone , tablet , i-pad ) an application to communicate with the controller which need to be connected to the router thru a cat5 or cat6 cable . With this configuration the controller can be accessed only from local network . When set as WEB Server , the user need to create a ''forward port'' rule in the settings of the router , and the controller can be accessed from all over the planet .
When set as UDP , a command is executed in less then one second and as a WEB Server the time is between 3 and 5 seconds on a local network and can reach longer times when accessed from another network or different country .
Power supply : 12Vdc / 1A
Output : 7 Free volt outputs ( relay )
-OUT1 independent
-OUT2 independent
-OUT3 independent
-OUT4 together with OUT6
-OUT5 together with OUT7
All network parameters are editable : IP , PORT , Gateway Address , Subnet Mask , MAC Address
Network settings are the same for UDP and WEB .
Default settings :
IP : 192.168.0.100
PORT : 9000
Gateway Address : 192.168.0.1
Subnet Mask : 255.255.255.0
MAC Address : 0.0.0
The outputs names on the WEB Server are all editable and can be 9 characters long .
The UDP controller has a unique ID which is use on all commands, and the commands are :
output 1 on : A5f4out01on
output 1 off : A5f4out01of
output 2 on : A5f4out02on
output 2 off : A5f4out02of
output 3 on : A5f4out03on
output 3 off : A5f4out03of
output 4 on : A5f4out04on
output 4 off : A5f4out04of
output 5 on : A5f4out05on
output 5 off : A5f4out05of
all outputs on : A5f4out99on
all outputs off : A5f4out99of
Where A5f4 is the controller ID .