WebController V13.1
This network controller V13.1 is the successor of WRemote controller presented here on the site . The new controller is based on ATmega8 microcontroller running at 16Mhz and the connection with the local network and the Internet is a network card that uses the Wiznet W5100 chip . This controller can be controlled using a PC, Android phone or Android tablet, iPhone or iPad via local network but also through the Internet . It has only two outputs and one input with which can read the temperature using DS18B20 sensor . To access it from local network, use IP address: 192.168.0.177 and port 8081, type in, your internet browser: 192.168.0.177:8081 .
To access the controller from the Internet, you must set the router to allow the use of port 8081 (port 8081 forwarding, TCP / UDP) and need to know the external IP address (Find my IP using Google), type in the web browser: address ip: 8081 .
If you want to build a similar controller and you need help, you can send me a message via the contact form.
The controller is set with the following parameters:
Gateway Address: 192.168.0.1
Subnet Mask: 255.255.255.0
IP Address: 192.168.0.177
Port: 8081
Mac Address: 00:08: DC: 00:00:00
HEX Atmega8 : download